low noise oscillator series lno 1000 b1 ocso @ 1000 mhz lno 1 000 revision b november 201 2 1 / 3 www.rakon.com r a k o n r e s e r v e s t h e r i g h t t o m o d i f y h e r e i n s p e c i f i c a t i o n s a n d i n f o r m a t i o n w h e n n e c e s s a r y t o p r o v i d e o p t i m u m p e r f o r m a n c e a n d c o s t specific request can be addressed to rakon info@rakon.fr product description lno 1000 b1 is a ln (low noise) ocvcso (oven controlled, voltage controlled, saw oscillator) at 100 0 mhz. it is designed for lab environment (test equipment, shelter, ground b ased military equipment, etc.). lno 1000 b1 is available in a 95.25mm x 76.2mm x 23.27mm package. features - 1 3 0 dbc/hz @ 1 khz offset (typical) < - 1 70 dbc/h z noise floor (typical) broadband j itter < 5 fs (offset frequencies from 10 khz to 40 mhz) applications instrumentation (test equipment, simulator) ground based military equipment a s per mil - prf - 28800f , class 3 1 gsps clock for adc up to 16 bits typical phase n oise test bench : noisext dcnts plot: individual phase noise
low noise oscillator series lno 1000 b1 ocso @ 1000 mhz lno 1 000 revision b november 201 2 2 / 3 www.rakon.com r a k o n r e s e r v e s t h e r i g h t t o m o d i f y h e r e i n s p e c i f i c a t i o n s a n d i n f o r m a t i o n w h e n n e c e s s a r y t o p r o v i d e o p t i m u m p e r f o r m a n c e a n d c o s t s pecifications 1 .0 environmental condi tion s line parameter test condition value unit 1.1 temperature range 0 to 50 c 1 . 2 storage temperature - 40 to 85 c 1 . 3 shock as per mil - prf - 28800f, class 3, test equipment 1.4 vibration as per mil - prf - 28800f, c lass 3, test equipment 2.0 electrical interface line parameter test condition value unit 2 .1 supply voltage pin 2 11.8 to 12.2 v 2.2 load impedance pin 3 50 2.3 control voltage pin 4 2 to 7 v 2.4 input impedance pin 4 10 min k 3.0 performances l ine parameter test condition value unit 3 .1 nominal frequency 1000 mhz 3 .2 frequency calibration initial calibration @ 25c 0.5 max ppm 3 .3 frequency stability over temperature 1 max ppm 3 . 4 long term stability after 30 days of continuous operation 1 max ppm/year 3 . 5 power consumption warm - up 9 max w 3 . 6 power consumption 25c (calm air) 4.2 max w 3 . 7 warm - up time 1ppm with reference to frequency reached after 1 hour of continuous operation at 25c 5 max minutes 3 . 8 frequency tuning monotone & positive slope 3 min ppm 3 . 9 slope 1 .5 to 3 ppm/v 3 .1 0 output waveform sine wave into 50 load 5 to 7 dbm single side band phase noise (pn) 3 .1 1 pn power density @ 1khz offset typical value at 25c. - 1 3 0 dbc/hz 3 . 1 2 pn power density @ 10khz offs et - 1 58 dbc/hz 3 . 1 3 pn power density @ 1mhz offset < - 1 70 dbc/hz 3 .1 4 harmonic distortion second and third harmonics - 30 max dbc 3 . 15 harmonic distortion non - harmonics - 80 max dbc time j itter (calculating from pn)
low noise oscillator series lno 1000 b1 ocso @ 1000 mhz lno 1 000 revision b november 201 2 3 / 3 www.rakon.com r a k o n r e s e r v e s t h e r i g h t t o m o d i f y h e r e i n s p e c i f i c a t i o n s a n d i n f o r m a t i o n w h e n n e c e s s a r y t o p r o v i d e o p t i m u m p e r f o r m a n c e a n d c o s t 3.16 full offset range f rom 10 h z to 4 0 mhz < 200 fs 3.17 broadband from 10 k hz to 40 mhz < 5 fs 4.0 mechanical features outline in mm 5 .0 pin description line pin number name description 5.1 1 - not to be connected 5.2 2 supply voltage input supply (+ ) 5.3 3 frequency output output signal 5.4 4 control voltage input voltage control 5.5 ground lug ground mechanical ground and ( - ) supply 5.6 5 - not to be connected
|